Gas Processing & LNG is Produced by Gulf Publishing Holdings LLC



NOFIRNO technology for Turkish portion of TANAP pipeline

Aalten, The Netherlands, - European gas production has fallen strongly over the past decade as more and more dependence is being placed on supplies from far-flung places such as Azerbaijan, where we find the Shah Deniz gas field in the Caspian Sea. A new gas pipeline is currently being laid and Beele Engineering is supplying the sealing systems for the section that passes through Turkey.

TURKISH TANAP
Beele Engineering will supply the sealing systems for the section that passes through Turkey. MAP SOURCE: EWA

The Shah Deniz gas field has reserves estimated at 1,200 billion m3 of natural gas and 400 million m3 of condensate. The gas will be transported through the 692-km-long South Caucasus Pipeline via Georgia to Turkey and then onwards to the European Union.  TEFKEN INŞAAT VE TESISAT A.Ş. has undertaken the engineering, procurement and construction of compressor and metering stations in the project. This Trans Anatolian Natural Gas Pipeline Project (TANAP) runs from the Georgian/Turkish border to the Turkish/Greek border, giving the pipeline a total length of 1,850 km.

TEFKEN Construction & Installation has been granted the challenging task of bridging this distance in 39 months.  The company therefore expects a great deal from the speed and installation friendliness of the systems being used. These are properties which are characteristic of Beele Engineering’s NOFIRNO system; the system is used to seal the cable penetrations in the various regulator and compressor stations along the Turkish stretch of the pipeline. As they are fitted with control equipment, pumps, compressors etc., the stations are of crucial importance in keeping the pressure in the pipe system at the required level. The design pressure along the stretch of pipeline concerned is 95.5 barg.

Suddenly occurring pressure resulting from an explosion or flood, places extraordinary demands on the quality of the rubber that is used for the cable and conduit transits. This needs to be elastic, it must not deteriorate and it has to be designed in such a way that compression cannot cause stress relaxation or permanent deformation. The NOFIRNO system combines these properties in a single solution. Even under the toughest of conditions, the system retains its mechanical stability. Movements and displacements are absorbed, among other things, by the layer of NOFIRNO sealant on each side of the penetration.

In addition to these dynamic tests, countless static tests, including numerous static pressure tests at 2.5 bar and an endurance test lasting 125 hours at 4 bar was carried out. In addition, service life tests demonstrated that the NOFIRNO system has a 50-year service life.


Copyright © 2018. All market data is provided by Barchart Solutions. Futures: at least a 10 minute delay. Information is provided 'as is' and solely for informational purposes, not for trading purposes or advice. To see all exchange delays and terms of use, please see disclaimer.

                                  CMEGroup                                     Icelogo

FEATURED COLUMNS

Editorial Comment
-Adrienne Blume
The US Energy Information Administration (EIA) reported in April that the US set records for natural gas production in 2017.
EWAnalysis
- Energy Web Atlas
Since market reforms first started in 1978, China has shifted from a centrally planned economy to a market-based economy, experiencing rapid economic and social development.
Industry Perspectives
-Eugene Gerden
Russia aims to ally with Qatar in LNG competition with Australia and other LNG-exporting majors over the coming years.


Maximize Profitability with Advanced Analytics at Natural Gas Processing Plants

View On-Demand

Incorporating economic data into process modeling is key to optimizing operations and maximizing profits at gas processing plants. However, maintaining optimal operations are often challenging due to changing market dynamics, contract structures and increasing process flexibility. Today, gas processors are leveraging Predictive Control and First Principles models to accurately determine and control the optimal operating targets in real time based on the most current plant conditions and profitability, optimizing recovery of natural gas liquids. Learn how real-time analytics, combined with decision support tools, empower companies to:
•Improve processing margins by up to 5%
•Maximize NGL production through improved availability and optimized process conditions
•Improve compositional control to operate closer to product specifications

May 22, 2018 10am CDT

View On-Demand

 

Please read our Term and Conditions, Cookies Policy, and Privacy Policy before using the site. All material subject to strictly enforced copyright laws.
© 2018 Gulf Publishing Holdings LLC.