Gas Processing & LNG is Produced by Gulf Publishing Holdings LLC



More U.S. oil and gas producers, refiners shut ahead of hurricane

More than a fifth of U.S. offshore oil production was shut and key exporting ports were closed on Tuesday as a precaution ahead of Hurricane Sally’s landfall on the U.S. Gulf Coast, the second significant storm to shutter oil and gas activity over the last month.

Slow-moving Sally weakened to a Category 1 hurricane on Tuesday and is expected to maintain that strength with sustained winds of 85 mile per hour (140 km per hour) through landfall by early Wednesday, the U.S. National Hurricane Center said.

The storm’s trajectory takes it through the prime U.S. offshore production areas on a path toward western Alabama, sparing some larger Gulf Coast refineries from high winds.

Royal Dutch Shell said it shut its Appomattox oil platform about 80 miles off the coast of Louisiana, joining BP , Chevron Corp and Equinor in closing facilities less than one month after Hurricane Laura forced up to 1.5 MM barrels per day of output to close temporarily.

The U.S. government said 21%, or nearly 396,000 barrels per day (bpd), of offshore crude oil production and 25%, or 685 MM cubic feet per day (mmcfd), of natural gas output were shut in the U.S. Gulf of Mexico.

Oil prices were tame on Tuesday despite the shutdowns. U.S. crude oil and gasoline futures each rose about 1% as domestic stockpiles of fuel remain above year-ago levels due to weaker demand during the pandemic.

The nation’s sole offshore terminal, the Louisiana Offshore Oil Port (LOOP), stopped loading tankers on Sunday, while the port of New Orleans closed on Monday. That will cut off roughly 307,000 bpd of crude and 411,000 bpd of refined products, according to Kpler data.

As of 7 a.m. CDT (1200 GMT) on Tuesday, Sally was about 65 miles (110 km) east of the mouth of the Mississippi River, and moving to the northwest at 2 mph (3 kph).

Refiners in the region have wound down operations. Phillips 66 said the Alliance oil refinery, which processes 255,600 bpd at a site along the Mississippi River on the coast of Louisiana, shut on Monday.

Shell cut production to minimum rates on Monday at its 227,400-bpd Norco, Louisiana, refinery.

(Reporting by Erwin Seba, Gary McWilliams in Houston and Devika Krishna Kumar in New York; Editing by Marguerita Choy and Jason Neely)


Copyright © 2019. All market data is provided by Barchart Solutions. Futures: at least a 10 minute delay. Information is provided 'as is' and solely for informational purposes, not for trading purposes or advice. To see all exchange delays and terms of use, please see disclaimer.

                                  CMEGroup                                     Icelogo

FEATURED COLUMNS

Editorial Comment
-Adrienne Blume
Facing regulatory uncertainty, competition from renewable energy and increasing calls for decarbonization, natural gas pipeline operators are studying the blending of hydrogen into their networks to produce lower-carbon methane and test their equipment’s capability for handling H2/methane blends.
Industry Focus: EastMed pipeline faces technical challenges, competition
-Eugene Gerden
The outcome of the EastMed pipeline project—a planned, 1,900-km (1,180-mi), subsea pipeline that would supply Europe with 9 Bm3y–12 Bm3y of natural gas from the Eastern Mediterranean—is being closely watched by many on the global stage.
Regional Focus: Africa’s floating LNG sector looks to regain footing post-pandemic
-Shem Oirere
The drive to harness natural gas reserves in Africa is supporting low-emissions energy generation and effective monetization of marginal and small gas fields.


Throughput optimization for pipelines and gas plants

Register Now

Many processes within oil and gas pipelines and processing plants depend on maintaining specific temperatures and pressures at which the process fluids are liquids or gases. In addition, anytime water is a component in the process fluid hydrates can form and plug piping and vessels. Learn how Sensia’s Throughput optimization solution allows operators, and control systems to “see inside” the process in real time to understand where the facility is operating with respect to critical physical constants, including the phase envelope and hydrate temperature. This insight allows for more stable operation, reduced energy expenditure and associated emissions, and greater facility throughput. Case studies will include controlling methanol injection, managing heaters, virtual sensors for sulfur recovery units and more.

April 1, 2021 10:00 AM CDT

Register Now

 

Please read our Term and Conditions, Cookies Policy, and Privacy Policy before using the site. All material subject to strictly enforced copyright laws.
© 2021 Gulf Publishing Holdings LLC.